PFAS and PPWR Compliance for Food Packaging

EU PPWR 2026: the compliance guide for food packaging buyers

The EU Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, entered into force in February 2025 and applies from 12 August 2026. It is a regulation, not a directive — which means it applies directly in every member state without national transposition, and there is no local variation to navigate.

For anyone buying food packaging for the EU market, it changes three things at once: the chemistry allowed in food-contact packaging, which single-use formats can still be sold, and what evidence you must be able to produce on request. This page is a buyer's working guide, not a product claim. Where we do not hold a document for a specific model, we say so.

The dates that matter

Date What happens Who it hits
11 February 2025 PPWR entered into force All operators placing packaging on the EU market
12 August 2026 PPWR applies. PFAS limits and single-use restrictions take effect Importers, distributors, foodservice operators, brand owners
2028 Harmonised labelling requirements apply Anyone printing packaging artwork
2030 All packaging on the EU market must be recyclable; recycled-content thresholds for plastics Material selection decisions you make now

The practical point: the 2030 recyclability requirement is decided by the material you specify in 2026. Packaging bought this year will still be in the market when the rule bites.

The PFAS limits — the part that changes sourcing

PPWR sets three thresholds for food-contact packaging. All three must be met:

Limit Threshold How it is measured
Any individual PFAS 25 ppb Targeted PFAS analysis
Sum of PFAS 250 ppb Targeted PFAS analysis, summed
Total fluorine 50 ppm Total fluorine screening, unless non-PFAS fluorine can be demonstrated

Two things make this harder than it reads:

  • Total fluorine is a screening test, not an identification test. A product made without intentional PFAS addition can still show a non-zero total fluorine result from background contamination or from non-PFAS fluorinated additives. Buyers need to know which test was run before accepting or rejecting a result.
  • Raw material is not the finished article. Processing aids, release agents and coatings enter at the forming stage. A material declaration does not automatically cover the moulded container you receive.

What changes beyond PFAS

  • Single-use restrictions. Certain single-use plastic packaging formats for foodservice and retail are restricted from August 2026 — including packaging for dine-in HORECA in some applications, condiment sachets, and certain fruit and vegetable formats.
  • Recyclability by design. From 2030 all packaging must be designed for recycling against harmonised criteria. Composite materials are the main risk area.
  • Recycled content. Plastic packaging must meet minimum recycled-content thresholds from 2030, which is a structural problem for virgin-plastic formats.
  • Labelling. Harmonised material and sorting labels from 2028 — expect to reprint artwork.
  • Empty space and over-packaging. Limits on empty space in transport and e-commerce packaging.

What this means, material by material

Material PFAS position Single-use / recycability position Practical read for 2026
Sugarcane bagasse (uncoated) Grease resistance comes from the fibre itself — no fluorochemical coating required Fibre-based, industrially compostable where certified; recyclability depends on the collection stream Lowest compliance risk for hot, oily food
Moulded fibre with a grease-proof coating At risk — traditional grease-proof coatings are the main PFAS target Coating can disqualify the article from recycling and from compostability Ask for the coating chemistry in writing before buying
Bamboo fibre + PP No fluorochemical coating; PP provides oil resistance Composite plastic — recyclability is the weak point against 2030 criteria Good performance, but plan for the recyclability question
White MFPP No fluorochemical coating Plastic — exposed to recycled-content and recyclability requirements Use where performance outweighs compliance risk
PLA / cornstarch blends Generally PFAS-free Industrially compostable only; heat-limited Good for cold applications, poor for hot food

How to verify a "PFAS-free" claim

Do not accept the phrase without a document. Ask these five questions in writing:

  1. Which test method was used — targeted PFAS panel, total fluorine screening, or combustion ion chromatography — and which laboratory issued the report?
  2. Does the report cover the finished article — the exact model, gram weight and construction you are ordering — or only the raw material?
  3. What is the detection limit, and what result was reported against it?
  4. Is the statement valid for the production site that will actually make your order?
  5. Can the report be reissued or re-tested at the start of each production season, and at whose cost?

A supplier who answers these precisely is usable even if the answer is partial. A supplier who says "PFAS free, no problem" without a document is telling you how they handle compliance in general.

The documents to have on file before August 2026

Document What it proves Who should issue it
PFAS test report The result against the 25 ppb / 250 ppb / 50 ppm thresholds Accredited third-party laboratory
Declaration of Compliance (DoC) The article meets the applicable food-contact regulation Supplier, based on test data
Food-contact test report Overall and specific migration results for the material Accredited laboratory
Material composition declaration What the article is made of, including coatings and additives Manufacturer
Compostability certificate (if claimed) Industrial compostability, with certificate number and validity date Certification body

A 90-day action plan

  1. Days 1–15 — map your range. List every SKU sold into the EU, its material, coating and current documentation status. Most buyers find 10–20% of the range has no valid file.
  2. Days 16–45 — request documents. Ask each supplier for the PFAS report, DoC and food-contact report per model. Expect gaps; a gap is information, not a failure.
  3. Days 46–70 — retest what is missing. Budget 3–6 weeks for laboratory turnaround. Do this before the August peak, not after.
  4. Days 71–90 — fix the range, not just the paperwork. Where a coated article fails, move that SKU to uncoated fibre rather than arguing about the limit.
  5. Ongoing — put it in the purchase order. Name the test method and make the report a condition of shipment, not a website statement.

Where bagasse and bamboo fibre sit

Moulded fibre products do not need fluorochemistry to hold a shape, which is why fibre ranges are usually the first place buyers look when PFAS becomes a concern. That does not make every fibre product PFAS-free by default — grease-resistant grades and some coated articles still need checking. Test the model, not the category.

Frequently asked questions

When does the EU PPWR apply to food packaging?

The Packaging and Packaging Waste Regulation (EU) 2025/40 applies from 12 August 2026. The PFAS limits and single-use restrictions take effect on that date; labelling requirements follow in 2028 and recyclability requirements in 2030.

What are the PFAS limits for food-contact packaging under PPWR?

Three thresholds apply together: 25 ppb for any individual PFAS, 250 ppb for the sum of PFAS, and 50 ppm for total fluorine, unless non-PFAS fluorine can be demonstrated.

Are sugarcane bagasse containers PFAS-free?

Uncoated moulded bagasse is naturally grease-resistant, so no fluorochemical coating is needed. Whether a specific model meets the PPWR thresholds is a question about that model's test report, not about the material category — ask for the report for the exact SKU.

Is bamboo fibre and PP packaging compliant with PPWR?

It carries no fluorochemical coating, so PFAS risk is low. The bigger exposure is the 2030 recyclability requirement, because bamboo fibre plus PP is a composite plastic. Plan for that question at the material selection stage.

Can you provide a PFAS test report before we place an order?

Yes, for the models and materials where we hold one. We send the actual report with the laboratory name, report number, method and detection limit visible, and we tell you what the report does not cover. If no report exists for the model you want, we say so before you order.

How we handle documentation requests

We do not publish a certificate on this website and imply it covers everything in the catalogue. When you tell us the material, the model and your destination market, we confirm which documents exist for that combination, send the actual file with the issuing laboratory and report number visible, and state what the document does not cover.

The safest procurement pattern is to specify the requirement in the purchase order, name the method, and make the report a condition of shipment rather than a marketing statement on a website.

Ask us about your requirement

Send the model, the material and the market requirement to sam5209@raiselai.com or WhatsApp +86 186 2047 9597. We reply within 24 hours on business days with what can be documented for that model.

Related: Quality & compliance · Compostability certifications explained · Sugarcane bagasse range.